79
Recalling Stored Data
Procedure for recalling stored data
1. Press the MENU key to display the [Menu List] screen.
2. Use the / / / keys to select [Recall] and press the ENT key.
3. The [Recall/Select File] screen is shown. Use the
/ keys to select
the store name and press the ENT key.
Important
If no SD card is inserted, the store name is not
displayed. In that case, insert an SD card rst
(see page 16).
[Recall/Select File] screen
The measurement
date/time indicated
here is the date/time
when the folder was
created.
Indicates that the folder
contains waveform data.
To Next Page
Loading...
Need help?
General
