20
Preparations
Attaching the sensor to the protective cover
When transporting the unit,
the sensor can be housed in the
cradle on the protective cover
of the unit, as shown in the
illustration at right.
Note
The protective cover serves to protect the unit from
external shocks. We recommend leaving the cover
on during use.
Caution
Dropping the sensor or otherwise subjecting
it to shocks can lead to damage. If the unit
is carried upside down with the sensor in the
protective cover (with the INPUT connector
for accelerometer pointing down), the sensor
may fall out. Take care to avoid this.
START/STOPSTOREPAUS E/C ON T
VIBRATION ANALYZER
VA-12
Protective
cover
To Next Page
Loading...
Need help?
General
