55
Measurement in FFT Mode
Before starting a measurement, be sure to set the clock of the
unit to the correct date/time (see pages 17 to 18).
This section contains basic instructions for measurement in FFT mode. The
following items are explained.
• Reading the display .................................................... Page 56 to 64
• Changing measurement parameters
and display parameters ...............................................Page 65 to 68
• Zooming/moving the display ...................................... Page 69 to 70
• Performing measurement ............................................ Page 71 to 74
• Storing measurement data .......................................... Page 75 to 76
For information on other items related to FFT mode measurement, refer to
the following sections.
• Trigger Functions ..................................................... Page 91 to 109
• Overlay Display ....................................................... Page 110 to 111
• Saving the Screen as a BMP File ................................Page 85 to 86
• Printing the screen......................................................Page 87 to 88
• Folder structure of stored data ........................................... Page 126
To Next Page
