Rion VA-12 - Data File Structure

127
Data File Structure
This section explains the structure of the  les used to store measurement
data on the SD card.
The following four types of  les are used.
• Vibration meter data store  le
This type of  le is stored when the VA-12 is in vibration meter
mode.
• Waveform data store  le
This type of  le is stored when the VA-12 is in time waveform
mode.
• FFT data store  le
This type of  le is stored when the VA-12 is in FFT mode.
• WAVE  le
This type of  le is stored along with the FFT data store  le when
the VA-12 is in FFT mode and the waveform recording function is
enabled. (See the “Recording Waveform Data” section.)