152
Speci cations
Standard compliance
CE marking CE requirements are met provided that a core lter is
tted to every cable
Chinese RoHS (export model for China only)
WEEE Directive
Piezoelectric accelerometer PV-57I (supplied accessory)
Accelerometer type
Shear-type piezoelectric accelerometer (CCLD type)
Sensitivity Listed on supplied calibration chart of PV-57I.
Frequency range 1 Hz to 5 kHz (±10%)
Dimensions 17 mm (width across hexagonal at) × 49 mm
Weight Approx. 45 g
Magnet attachment Approx. 15 g
Input section
Input connectors
Accelerometer connector
× 1 channel (BNC)
Connector for piezoelectric accelerometer (standard
supplied accelerometer: PV-57I)
Sensor drive (CCLD: 18 V, 2 mA) supported
(CCLD: 24 V, 4 mA available as factory option)
PV-57I with integrated preampli er (CCLD type)
Frequency range: 1 Hz to 5 kHz
Maximum continuous acceleration
measurement limit: 200 m/s
2
peak
External trigger input connector (TRIG IN)
× 1 (ultra mini jack, 2.5 mm dia.)
External trigger control using falling edge of TTL
level signal
OPTION connector
For future expansion (currently not used)
Measured vibration quantities
Acceleration: Signal input from accelerometer
Velocity: Calculated by integration from acceleration
signal
Displacement:
Calculated by squared integration from
acceleration signal
Acceleration envelope curve:
1 kHz to 20 kHz acceleration envelope
curve signal (analyzer mode only)
To Next Page
Loading...
Need help?
General
