159
Speci cations
Startup functions
Resume function Settings are memorized when power is turned off and
restored at next power-on
Loading setup les at startup
A speci c le of settings stored on SD card can be
loaded automatically at startup
Input/output section
USB port ×1 (Mini B)
Removable disk function
Allows use of SD card inserted in unit as removable
storage device
Required cable type: USB A - Mini B cable (compliant
with USB 2.0 standard)
Printer function
Dedicated USB printer (BL-112UI) can be used for
printing
Screen print: Current display contents (hard copy)
Continuous print:
Continuous printing of speci ed store
address range
Cable type: USB Mini B - B cable
Beep For audible feedback of switch operation and measurement
status check
Ambient temperature and humidity conditions for use
Piezoelectric accelerometer PV-57I
−20°C to +70°C, 90%RH or less
Main unit −10°C to +50°C, 90%RH or less (no condensation)
Power supply section
Power source IEC R6 (size AA) batteries or dedicated AC adapter
NC-99
Batteries: eight IEC R6 (size AA) batteries
Battery life:
approx. 12 hours (23°C, alkaline batteries, backlight off)
External DC: 12 V (11 V to 15 V)
Power consumption:
approx. 145 mA (23°C, normal operation, backlight off)
Power consumption (primary side):
approx. 10 VA(in case of AC 100 V(NC-99))
To Next Page
Loading...
Need help?
General
