Robopac PACK 5040M - Information on Handling and Installation Operations; Recommendations for Handling and Loading; Package

PACK 5040M/6050M
PACK 5040A/6050A
4. INFORMATION ON HANDLING AND INSTALLATION
OPERATIONS
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
|
Important
Accomplish handling and loading according to the instructions supplied by the manufacturer to be found on
the machine and in the operating instructions. The person authorized to accomplish these operations must, if
necessar
y
, or
g
anise a "safet
y
p
lan" to
g
uarantee safet
y
to the
p
ersons directl
y
involved.
Use normal lifting equipment and means of transport, in accordance with the instructions to be found on the
p
acka
g
in
g
itself.
Those persons responsible for lifting and transportation operations must decide which are the most suitable
means accordin
g
to the machine’s destination.
Carefully read the "Instructions for use" specified in the manual and those applied directly to the machine
and/or the
p
acka
g
e.
Provide suitable safety conditions in compliance with the regulations on workplace safety to prevent and
minimise the risks.
Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED PURPOSES and assess the
p
ossible RESIDUAL RISKS.
4.2. PACKAGE
T
he
p
ackin
g
is realised, kee
p
in
g
the overall dimensions low, also in consideration of the trans
p
ort chosen.
To facilitate transport, shipping can be performed with some components disassembled and appropriately
p
rotected and
p
acka
g
ed.
Some
p
arts, es
p
eciall
y
electric e
q
ui
p
ment, are
p
rotected with anti-moisture n
y
lon covers.
T
he cases are marked with all necessar
y
information for loadin
g
and unloadin
g
.
Packa
g
in
g
material should be a
pp
ro
p
riatel
y
dis
p
osed accordin
g
to the laws in force.
Types of packaging Units
of
measur‑
ement
PACK 5040M PACK 5040A PACK 6050M PACK 6050A
1- Package on pallet
(LxWxH)
mm 2180x1360x1500 2480x1460x1500
English
22/56