Robopac PACK 5040M - Information on Adjustments; Recommendations for Adjustments; Carrier Height Adjustment

PACK 5040M/6050M
PACK 5040A/6050A
5. INFORMATION ON ADJUSTMENTS
5.1. RECOMMENDATIONS FOR ADJUSTMENTS
‒ Before performing any operation, the authorised operator must make sure that he/she understood the
"Instructions for use".
‒ Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED PURPOSES and assess
the
p
ossible RESIDUAL RISKS.
| Important
Before carrying out any adjustment operations, activate all the safety devices provided for, and evaluate if it is
necessar
y
to ade
q
uatel
y
inform the o
p
eratin
g
p
ersonnel or the
p
ersonnel nearb
y
.
In particular, confine the neighbouring areas to impede access to the devices that could, if activated, produce
unex
p
ected dan
g
er conditions
p
rovokin
g
hazards to
p
ersonal safet
y
and health.
5.2. CARRIER HEIGHT ADJUSTMENT
Proceed as indicated.
Turn the manual (A) hand-wheel to raise or lower the (B-C) carriers.
| Important
For
p
ro
p
er weldin
g
, lower the carriers, with res
p
ect to the weldin
g
surface, to half the hei
g
ht of the
p
roduct.
English
27/56