Robopac PACK 5040M - Condensate Discharge

PACK 5040M/6050M
PACK 5040A/6050A
Mineral oil +23°C/+50°C -320 CST/40°C
MELLANA OIL 320 IP
SPARTAN EP 320 ESSO
T
OTALCARTER SYOO TOTAL
MOBILGEAR 632 MOBIL
OMALA EP 320 SHELL
ENERGOL GR-XP 320 BP
Gear motor
Mineral oil +32°C/+50°C -460 CST/40°C
MELLANA OIL 460 IP
SPARTAN EP 460 ESSO
BLASIA 460 AGIP
MOBILGEAR 634 MOBIL
OMALA EP 460 SHELL
ENERGOL GR-XP 460 BP
Worm gear motor
Grease
T
ELESIA COMPOUND B I
P
STRUCTOVIS P LIQUID KLUBER
T
OTALCARTER SYOO TOTAL
Gear and worm gear motor
Synthetic oil
T
ELESIA OIL I
P
SYNTHESO D 220 EP KLUBER
BLASIA S 220 AGIP
Gear and worm gear motor
Lithium grease ALVANIA R2 SHELL
HL 2 ARAL
ENERGREASE LS2 BP
BEACON 2 ESSO
MOBILIX MOBIL
Bearings with support
Synthetic oil -5°C / +5°C VG 68 (SAE 20)
+5°C / +25°C VG 100 (SAE 30)
Reel carriage lifting
chain
Synthetic oil +25°C/+45°C VG 150 (SAE 40)
+45°C/+70°C VG 220 (SAE 50)
Table rotation chain
Synthetic oil MOBIL PYROLUBE 830 Tunnel conveyor chain
|
Important
Do not mix oils of different makes and specifications.
7.5. CONDENSATE DISCHARGE
Proceed as indicated.
1. Close the tap (A) and control the level of
condensation in the container (B).
2. Unscrew, if necessary, the valve (C) to
empty condensation.
3. Push the valve (C) up until all
condensation is removed.
4.
T
i
g
hten the valv
e
(C).
English
47/56