Robopac PACK 5040M - Terms and Definitions

PACK 5040M/6050M
PACK 5040A/6050A
A) Machine model.
B) Machine’s serial number.
C) Year of manufacture.
D) Mains voltage.
E) Mains frequency.
F) Number of phases.
G) Absorption.
H) Total installed power.
I) Air consumption.
L) Maximum pressure.
M) Mass.
N) Manufacturer and address.
1.3. TERMS AND DEFINITIONS
Some recurring terms found within the manual are described in order to provide a more complete image of
their meanin
g
s.
‒ Routine maintenance
Group of functions necessary to maintain suitable machine operations and efficiency. Normally the
manufacturer, who defines the necessar
y
skills and intervention
p
rocedures,
p
lans these o
p
erations.
‒ Non-routine maintenance
The whole of the operations necessary to keep the operating and efficiency capacity of the machinery.
These operations are not scheduled by the manufacturer and must be carried out by the maintenance
technician.
‒ Qualified technician
a person authorised and chosen from those who have the requirements, skills and information
necessar
y
for installation, use and extraordinar
y
maintenance of the machine.
‒Operator
A person authorised and chosen from those who have the requirements, skills and information
necessar
y
for installation, use and ordinar
y
maintenance of the machine.
‒ Maintenance technician
A person authorised and chosen among those who have the requirements, skills and information
necessary to perform ordinary and extraordinary machine maintenance. He is expected, therefore, to
p
ossess
p
recise information and skills with
p
articular ex
p
ertise in the field of intervention.
‒Format Change
series of operations to carry out on the machine before starting to work with the machine with different
characteristics res
p
ect to the
p
revious ones.
‒ Training
training process aimed to transfer to the operator the knowledge, skills and behaviour required to
o
p
erate the machine autonomousl
y
,
p
ro
p
erl
y
and safel
y
.
‒ Installer
technician chosen, among those that meet the requisites, and authorised by the manufacturer or by its
re
p
resentative, to install and test the machine or the s
y
stem in
q
uestion.
‒ Assistant
em
p
lo
y
ee assi
g
ned to assist the
p
roduction
p
rocesses of the machine or s
y
stem in
q
uestion.
‒Scrap
p
rocess residue from the material used.
‒ Production manager
A qualified and skilled technician with experience in the operation and use of machinery in the relevant
manufacturing field.
According to the production needs, the Supervisors may use the machine themselves or give the task to
another O
p
erator.
English
5/56