Robopac PACK 5040M - Assembly Instructions

PACK 5040M/6050M
PACK 5040A/6050A
| Important
Y
ou are advised to kee
p
the
p
acka
g
in
g
material.
4.5.2.ASSEMBLY INSTRUCTIONS
i
Danger - Warning
Authorised technical service personnel must perform installation and assembly operations.
i
Caution - Warning
The handling of the machine with the use of the fork device must be carried out ONLY with the (A) shipping
beam correctly installed.
T
he shi
pp
in
g
beam is an inte
g
ral
p
art of the forkin
g
s
y
stem.
Proceed as indicated.
‒ Remove the screws that block the machine to the wooden
p
allet.
‒ Insert the forks of the forklift into the relevant compartments provided in the base so as to exceed the
shi
pp
in
g
beam.
‒ Lift the machine from the
p
allet.
‒ Insert the wheels.
‒ Place the machine in the area assi
g
ned for assembl
y
.
|
Important
It must be
p
laced on a smooth, level surface for assembl
y
.
‒ Remove the (A) shi
pp
in
g
beam and store it for subse
q
uent movements.
English
24/56