Robopac PACK 5040M - Page 36

PACK 5040M/6050M
PACK 5040A/6050A
5) "Sealin
g
conve
y
or s
p
eed" ke
y
:
p
ro
g
rams the ta
p
e weldin
g
s
p
eed.
Values from 0÷ 50 sec. with 1 sec. increments can be set.
- Press the key to activate the function; the relative LED lights up and the display shows the current
value.
6) Decrease values ke
y
.
T
o decrease the value of the selected
p
aramete.
T
he value decreases b
y
one unit each time the ke
y
is
p
ressed.
7) Increase values ke
y
.
To increase the value of the selected parameter. The value is increased by one unit each time the key is
p
ressed.
8) "Pro
g
ram list" ke
y
: to view the current
p
ro
g
ram number.
Three different Pr1 - Pr2 - Pr3
p
ro
g
rams can be selected.
Y
ou can memorize the c
y
cle
p
arameters accordin
g
to
y
our needs, for each
p
ro
g
ram.
9) (PACK 5040A - PACK 6050A) "Manual" functionin
g
mode ke
y
: selects the machine’s manual c
y
cle.
- Press the key to activate the function; the relative LED lights up and the display shows the word
"Man".
10) "Tunnel tem
p
erature" ke
y
: to set the retraction tunnel tem
p
erature.
- Press to dis
p
la
y
the actual tem
p
erature.
- In order to increase or decrease the value, keep the key pressed (the set temperature is displayed)
and
p
ress th
e
(6) or (7) ke
y
s res
p
ectivel
y
to obtain the desired one.
- When the ke
y
is released, the actual tem
p
erature a
pp
ears once a
g
ain on the dis
p
la
y
.
- Values from 0÷ 200°C. can be set.
11) "Tunnel carrier s
p
eed" ke
y
:
p
ro
g
rams the tunnel carrier s
p
eed.
T
he
p
arameter is
p
ro
g
rammable from 0 sec. to 50 sec. with increments of 1 sec.
- Press the key to activate the function; the relative LED lights up and the display shows the word
"Man".
12) (PACK 5040A - PACK 6050A) "Pause time between two cycles" key: only functions in automatic cycle
mode. It allows to
p
ro
g
ram the
p
ause time between one c
y
cle and the next.
T
he
p
arameter is
p
ro
g
rammable from 0.0 sec. to 7.0 sec. with increments of 0.5 sec.
- Press the key to activate the function; the relative LED lights up and the display shows the word
"Man".
13) "Piece counter" ke
y
: to view the number of
p
acka
g
ed
p
ieces.
14) Di
g
ital dis
p
la
y
: dis
p
la
y
s the work
p
arameters and the alarm initials.
English
36/56