ROBOTIQ 2F-140 - Page 89

2F-85 & 2F-140 - Instruction Manual
Icon FunctionalityName Description
Scan
Command allowing for a detection of connected
grippers. After tapping this button, the latter will
display in the Gripper Dashboard.
Change ID
Tap the arrow next to the text box to expand a list
of available gripper IDs. Selecting an available
number will allocate it to the corresponding
gripper.
E-Open
Tapping this button sends an emergency open
command to the corresponding gripper, whether it
is activated or not.
E-Close
Tapping this button sends an emergency close
command to the corresponding gripper, whether it
is activated or not.
89