Robustel GoRugged R3000 Lite - SMS Remote Status Reading

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.4.1 15.11.2016 115 / 135
Confidential
4.2.2 SMS Remote Status Reading
R3000 Lite supports remote control via SMS. Users can use following commands to get the status of R3000 Lite,
cannot set new parameters of R3000 Lite at present.
An SMS command has following structure:
Password:cmd1,a,b,c;cmd2,d,e,f;cmd3,g,h,i;...;cmdn,j,k,n
SMS command Explanation:
1. Password: SMS control password is configured at Basic‐>SMS Control‐>Password, which is an optional
parameter.
a) When there is no password, SMS command has following structure: cmd1;cmd2;cmd3;…;cmdn
b) When there is a password, SMS command has following structure: Password:cmd1;cmd2;cmd3;…;cmdn
2. cmd1, cmd2, cmd3 to Cmdn, which are command identification number 0001 – 0010.
3. a, b, c to n, which are command parameters.
4. The semicolon character (‘;’) is used to separate more than one commands packed in a single SMS.
5. E.g., 1234:0001
In this command, password is 1234, 0001 is the command to reset R3000 Lite.
Cmd
Description
Syntax
Comments
Control Commands
0001
Reset device
cmd
if no passwd, please use
command "cmd", or use
command" passwd:cmd"
cmd1 + cmd2: cmd1;cmd2
* - means can be null
0002
Save parameters
cmd
0003
Save parameters
cmd
0004
Start PPP dialup
cmd
0005
Stop PPP
cmd
0006
Switch SIM card
cmd
0007
Enable/disable event counter
cmd, channel, flag
channel:
1 - DI_1
2 - DI_2
flag:
0 - disable
1 - enable
0008
Get event count value
cmd, channel
channel:
1 - DI_1
2 - DI_2
0009
Clear event count
cmd, channel
channel:
1 - DI_1
2 - DI_2
0010
Clear SIM card’s data limitation
cmd, simNumber
simNumber:
1 - SIM_1