Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.4.1 15.11.2016 42 / 135
Confidential
3.12 Configuration > Ethernet
This section allows users to set the Ethernet LAN parameters of Eth0.
IP Address, Netmask,
MTU, Media Type @
LAN Interface
Set the IP address, Netmask, MTU and Media Type of Eth0. These
parameters will be un-configurable if you enable Bridge.
Multiple IP Address @
LAN Interface
Assign multiple IP addresses for Eth0.
Enable DHCP Server @
DHCP Server
Enable to make router can lease IP address to DHCP clients which
connect to Eth0.
IP Pool Start, IP Pool End
@ DHCP Server
Define the beginning (IP Pool Start) and end (IP Pool End) of the pool
of IP addresses which will lease to DHCP clients.
192.168.0.2/
192.168.0.100