Robustel GoRugged R3000 Lite - Configuration > Ipsec

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.4.1 15.11.2016 65 / 135
Confidential
3.21 Configuration > IPSec
This section allows users to set the IPSec parameters.
IPSec Basic @ IPSec
Item
Description
Default
Enable NAT Traversal
Tick to enable NAT Traversal for IPSec. This item must be enabled when router
under NAT environment.
Enable
Keepalive Interval
The interval that router sends keepalive packets to NAT box so that to avoid it
to remove the NAT mapping.
30