Roche Cedex Bio System User Manual

Roche Diagnostics
Operator’s Manual · Version 3.1 D-21
Cedex Bio System 9 Messages and alarms
List of alarm messages
13009 A software error occurred. An invalid database entry (%d)
for a control was detected.
Export the log files. If the error persists call service.
13010 A software error occurred. An invalid database entry (%d)
for a control was detected.
Export the log files. If the error persists call service.
13011 Validation of Development Channels failed. The number
of installed DC applications does not match the number
of available channels. (%d DC applications found, %d
channels installed).
13012 Auxiliary reagent (%d) not found. Ensure that the reagent bottle has been loaded. If the error
recurs export the log files with the system remaining in
this error condition. If the error persists call service.
13013 Reagent bottle %d not found. Ensure that the reagent bottle has been loaded. If the error
recurs export the log files with the system remaining in
this error condition. If the error persists call service.
13014 Calibrator lot definition for application %d inconsistent.
Check number of standards used with number of
calibrator cups and Last Is Water definition.
20001 <Replace Water Inlet Filter> completed.
20002 <Clean Water and Waste> completed.
20003 <Replace Photometer Lamp> completed.
20004 <Clean Probe Manually> completed.
20005 <Prime Fluid System> completed.
20006 <Clean Housing> completed.
20007 <Deproteinize Probe> completed.
20008 <Clean Reagent Disk> completed.
20009 <Database Backup> completed.
20010 <Call Service Rep.> completed.
20011 <Clean ISE Tower Manually> completed.
20012 <Replace ISE Unit Tubing> completed.
20013 <Replace ISE Pump Tubing> completed.
20014 <Replace ISE %s Electrode> completed.
20015 <Initialize ISE Reference Sensor> completed.
20016 <Clean ISE Tower Automatically> completed.
20017 <Initialize ISE Unit> completed.
20019 <Electrode Service> completed.
20020 <Activate Electrodes> completed.
20021 <Prime ISE Reference and Calibrator> completed.
20022 <Condition ISE Tubing> completed.
20023 An unknown action %d was completed successfully.
20024 Installation completed. The intervals of the maintenance
actions were reset successfully (except daily maintenance
actions).
20025 <Abs. Air/Water Calibration> completed.
20026 The external water reservoir was refilled.
20027 The external waste container was emptied.
ID Message Comment
Table D-1 List of alarm messages (Continued)

Roche Cedex Bio System Specifications

General

Brand	Roche
Model	Cedex Bio System
Category	Measuring Instruments
Language	English