EasyManuals Logo
Home>Rockwell Automation>Touch terminals>2711P-T7C22D9P

Rockwell Automation 2711P-T7C22D9P User Manual

Rockwell Automation 2711P-T7C22D9P
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
Rockwell Automation Publication 2711P-UM008I-EN-P - February 2022 103
Chapter 3
The terminals are not shipped with pre-configured printers so initially
the dialog box is empty.
2. Select an installed printer.
TIP Series B terminals (Series C for Stainless Steel terminals) have a pre-
configured printer driver. With the IPP service enabled on Series B terminals
(Series C for Stainless Steel terminals), if an IPP printer is detected it
automatically appears in the printer selection list.
The PDF printer driver is available by default on Series A and Series B
terminals (Series C for Stainless Steel terminals).
TIP The printer you select must be in the control panel Printers applet.
A failed attempt to automatically install a printer is reported in the system
event log.
A printer that does not install automatically can be installed manually by
using the control panel in Windows Explorer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rockwell Automation 2711P-T7C22D9P and is the answer not in the manual?

Rockwell Automation 2711P-T7C22D9P Specifications

General IconGeneral
BrandRockwell Automation
Model2711P-T7C22D9P
CategoryTouch terminals
LanguageEnglish

Related product manuals