EasyManua.ls Logo

Rohde & Schwarz FSW Series - 2 Welcome to the Analog Demodulation Application; 2.1 Starting the Analog Demodulation Application

Rohde & Schwarz FSW Series
371 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Welcome to the Analog Demodulation Application
R&S
®
FSW-K7
11User Manual 1173.9240.02 ─ 17
2 Welcome to the Analog Demodulation
Application
The R&S FSW-K7 AM/FM/PM measurement demodulator option converts the
R&S FSW into an analog modulation analyzer for amplitude-, frequency- or phase-
modulated signals. It measures not only characteristics of the useful modulation, but
also factors such as residual FM or synchronous modulation.
The digital signal processing in the R&S FSW, used in the Spectrum application for
digital IF filters, is also ideally suited for demodulating AM, FM, or PM signals. The
firmware option R&S FSW-K7 provides the necessary measurement functions.
The R&S FSW Analog Demodulation application features:
AM, FM, and PM demodulation, with various result displays:
Modulation signal versus time
Spectrum of the modulation signal (FFT)
RF signal power versus time
Spectrum of the RF signal
Determining maximum, minimum and average or current values in parallel over a
selected number of measurements
Maximum accuracy and temperature stability due to sampling (digitization) already
at the IF and digital down-conversion to the baseband (I/Q)
Error-free AM to FM conversion and vice versa, without deviation errors, frequency
response or frequency drift at DC coupling
This user manual contains a description of the functionality that the application pro-
vides, including remote control operation.
All functions not discussed in this manual are the same as in the base unit and are
described in the R&S FSW User Manual. The latest version is available for download
at the product homepage
(http://www2.rohde-schwarz.com/product/FSW.html).
Installation
You can find detailed installation instructions in the R&S FSW Getting Started manual
or in the Release Notes.
2.1 Starting the Analog Demodulation Application
Analog Demodulation is a separate application on the R&S FSW.
To activate the Analog Demodulation application
1.
Press the MODE key on the front panel of the R&S FSW.
Starting the Analog Demodulation Application

Table of Contents

Other manuals for Rohde & Schwarz FSW Series

Related product manuals