Configuration
R&S
®
FSW-K7
53User Manual 1173.9240.02 ─ 17
Load Standard ← Setup Standard
Loads the selected measurement settings file.
Remote command:
[SENSe:]ADEMod:PRESet[:STANdard] on page 180
Save Standard ← Setup Standard
Saves the current measurement settings for a specific standard as a file with the
defined name.
Remote command:
[SENSe:]ADEMod:PRESet:STORe on page 181
Delete Standard ← Setup Standard
Deletes the selected standard. Standards predefined by Rohde & Schwarz can also be
deleted. A confirmation query is displayed to avoid unintentional deletion of the stand-
ard.
Note: Restoring predefined standard files. The standards predefined by Rohde &
Schwarz available at the time of delivery can be restored using the "Restore Stand-
ards" softkey.
(See "Restore Standard Files" on page 53).
Restore Standard Files ← Setup Standard
Restores the standards predefined by Rohde & Schwarz available at the time of deliv-
ery.
Note that this function will overwrite customized standards that have the same name
as predefined standards.
Remote command:
[SENSe:]ADEMod:PRESet:RESTore on page 181
5.3 Configuration Overview
Throughout the measurement configuration, an overview of the most important cur-
rently defined settings is provided in the "Overview". The "Overview" is displayed when
you select the "Overview" icon, which is available at the bottom of all softkey menus.
Configuration Overview
To Next Page
Loading...
