32
Connecting External Equipment
Input/Output up to 40 Channels
This enables you to record/playback up to 40 channels input and output from/to a MADI device.
For this connection, set the REAC setting on the R-1000 to “SOUND CHECK.” Refer to “About REAC Settings” (p. 36).
* Connect REAC MAIN on the
S-MADI
to the [TO MASTER] REAC port on the R-1000. If you are using the unit with the factory-default settings
unchanged, make the connection to the [A] port.
fig.single-madi.eps
What’s MADI?
MADI (Multichannel Audio Digital Interface) is a transmission standard for digital audio standardized by AES. An extension of the
AES/EBU standard for stereo (two-channel) transmission, it permits transmission of up to 64 channels over a single cable.
Example 6: Connecting a MADI Device via the S-MADI
REAC Master/Slave Device
REAC Master Device
S-MADI
40ch
A
To Next Page
Loading...
