34
Connecting External Equipment
This unit is equipped with balanced-type (XLR/TRS) connectors, which are wired as shown below. Check the wiring of the device you want to
connect and make the connection.
fig.XLR-TRS_jack.eps
Connecting Monitor Speakers
Connect monitor speakers to the MONITOR OUT connectors.
* The same mono audio is output from the [1] and [2] connectors.
* The nominal output level at the MONITOR OUT connectors is fixed at +4 dBu. It is recommended to connect monitors with accessible volume
control. So the volume can be easily adjusted.
fig.connect-monitor.eps
Connecting Headphones
Connect headphones to the PHONES connector. You can use the [LEVEL] to adjust the volume level of the headphones.
* Output to the headphone (L/R) is mono audio x 2.
fig.connect-phone.eps
Connecting Other Peripheral Devices
Connecting Monitor Equipment
To Next Page
Loading...
