73
Appendices
You can use the connectors described below to operate the R-1000 remotely from an external device.
• PC Connect a computer on which the dedicated remote control software (R-1000 RCS) is installed.
• GPI Connect a foot switch or other device capable of GPI output.
• RS-232C Connect a computer or other equipment capable of sending RS-232C serial signals.
• MIDI Connect a MIDI device.
For more information about remote control, download the separately available reference document from the following Roland
website.
http://www.roland.co.jp/solution/
* Download the separate PDF files for R-1000 RCS and for remote control via GPI/RS-232C/MIDI.
The calendar/clock does not function correctly.
Is the internal lithium battery almost dead? Follow the procedure in "About the Internal Lithium Battery" (p. 15) to replace the
battery.
Projects are not recognized.
Has the folder configuration on removable storage been altered? Altering the folder configuration can make it impossible for the
R-1000 to recognize project data. Restore it to the state described in "Folder Configuration on Removable Storage" (p. 37).
Operations are not accepted.
Has panel operation been locked? Follow the procedure in "Locking and Unlocking Panel Operation" (p. 57) to unlock it.
Input and output are not possible.
Have the REAC settings for the connected REAC device and the R-1000 been made correctly? Refer to "Connecting REAC Devices"
(p. 24) and "About REAC Settings" (p. 36) and make the correct settings for each device.
Also, refer to "Before Making REAC Connections" (p. 24) and check the sampling rate and the connection cables as well.
A silent track is produced during recording.
Were automatic settings used to select the recording tracks? The automatic settings assign a recording track even when an
unused channel is present on the source device. When this happens, the tracks with the unused channels are silent. If you do not
want to create a silent track, follow the procedure in "Selecting a Recording Track Manually" (p. 44) and make the setting
manually.
Recording data cannot be copied to external storage.
Is the external storage device locked? Be sure to unlock it before connecting it to the R-1000.
Audio data cannot be imported.
Are you trying to import a file in a format that the R-1000 does not support? The R-1000 supports only 24-bit .wav files at 44.1 kHz,
48 kHz, or 96 kHz.
Synchronization with other equipment is not possible.
Have the clock source and timecode source been set correctly? For information on synchronization-related connections and
settings, refer to "Synchronizing Operation with Video Equipment" (p. 64), and also download the reference document (R-1000
Application Guide) from the following Roland website.
http://www.rolandsystemsgroup.net/
About Remote Control
Troubleshooting
To Next Page
Loading...
Need help?
General
