52
Performing Multi-track Playback
4. Checking Track Playback on Monitor Equipment
The level meter on the R-1000 is divided into groups of eight tracks. Touch the area of the level meter you want to confirm.
Selecting a track in the [Solo] area outputs the audio recorded on the track to the monitor equipment and headphones.
* The selection made at [Solo] does not affect the output to the REAC device.
* You can choose whether to output only a single track with [Solo] or to add more tracks and output them together. Refer to “Menu List” (p. 71).
fig.solo-output.eps
5. Select the playback track.
Select the track to output in [Play] area. Touching [All] lets you select all playable tracks as a group.
When you finish making the settings, be sure to touch the [Done] icon to apply the settings.
fig.select-play-target.eps
6. Check the status.
You can use the [STATUS INDICATOR] button on the front panel to check the settings for tracks 1 through 48. To check tracks,
press the [STATUS INDICATOR] button to make the [PLAY] indicator light up green. The tracks that light up green in the [STATUS]
area for 1 through 48 have been selected for playback.
fig.check-status.eps
To Next Page
Loading...
