62
About Other Features
3. Select the project.
Select the copy source project. Editing options for the project are displayed.
fig.select-project.eps
4. Select “Copy.”
Select [Copy]. The display changes to a screen for selecting the copy destination.
fig.select-copy.eps
5. Select the copy destination.
Select the copy destination storage device. To copy to external storage, select [EXTERNAL].
* You can also copy to removable storage by selecting [REMOVABLE].
fig.select-storage.eps
6. Perform the copy operation.
Selecting the destination storage makes a confirmation screen appear. Touching [Copy] starts copying to the destination.
* If an identically named project is already on the destination volume, the Name Edit screen (p. 60) will appear . Change project name and touch
[Done].
fig.copy-dialog.eps
7. Return to the home screen.
Press the [MENU] button to return to the home screen.
If you want to copy a project from the external storage device to the removable storage drive, touch the [External] icon located in the lower left of
the screen shown in step 3.
To Next Page
Loading...
