81
Insert a new felt wiper.
Attach the hook.
Always attach the wiper to the hook. Failure to do so
may result in dot drop-out or other problems.
3.
Reattach the right cover, and exit the felt wiper replacement menu.
Attach the right cover.
Press .
After the process to exit the felt wiper replacement menu, the screen
shown on the left appears.
Press to go back to the original screen.
4.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results.
P. 45"Printing Tests and Normal Cleaning"
To Next Page
Loading...
