Roland Texart RT-640 - Using Hard-To-Dry Media; Using Media that Does Not Move Smoothly

Accommodating Different Media Types and Conditions
4
Advanced Functions
94
Using Hard-to-dry Media
Procedure

Press .

Press several times to display the screen shown
at left.
Press
.

Press several times to display the screen shown
at left.
Press
.

Press or to select a value.
Larger values cause the media to move more slowly, enabling you to
extend the drying time accordingly.
Press to conrm.

Press to go back to the original screen.
Description
Use this setting when ink drying is poor. Depending on the software RIP you are using, you can also make this
setting in the software RIP. When you have made the setting in the software RIP, the software RIP's setting is
used and the machine's setting is ignored.
Default Setting
[SCAN INTERVAL]: OFF
Using Media that does not Move Smoothly
Procedure

Press .

Press several times to display the screen shown
at left.
Press
.

Press several times to display the screen shown
at left.
Press
.
/'07
57$/'07
57$/'07
5%#0+06'48#.
5%#0+06'48#.
1((UGE
/'07
57$/'07
57$/'07
8#%77/219'4