Roland Texart RT-640 - Setup of Media; About [Media Setting] Menu; Setup of Media ([Media Setting] Menu)

39
2
Basic Operation
Setup of Media
About [Media Setting] menu
To ensure the optimal printing according to the media size and type, various setting items are provided in
the machine. The machine provides the [Media Setting] menu that guides you through these settings in an
interactive mode. Using this menu, you can set all of the basic settings simply by following the instructions
on the display.
Since setting details can be stored as a preset menu, you can work eciently by skipping the setup procedure
when using the same type of media. Once the basic settings have been stored in a preset, ne adjustments
can be made as necessary.
The items set through the [Media Setting] menu can be also set individually.
Setup of Media ([Media Setting] menu)
Note: If any setting is not needed for each setting item, you can go to the next menu by selecting [Next].
1. Starting the [Media Setting] menu

Load media.
Check that no sagging is found on the media. If any sagging exists, the following correction value settings
will not function eectively.
 P. 18"Loading Media"

Press .

When the screen on the left is displayed, press .
2. Adjusting the print head height

Press to select [Change].
Press
to conrm.
/'07
/'&+#5'66+0)
To cancel setup
Procedure

Press during setup.

Press to select [Cancel].
Press
.
The screen on the left appears again.
Selecting [Back] returns you to the screen that was
displayed when you pressed
.
37+65'66+0)
=;'5?01
/'07
/'&+#5'66+0)
*'#&*)6.19
=%*#0)'?0':6