90
Description
The movement distance of the media changes subtly depending on the media's thickness. When the move-
ment distance becomes discrepant, horizontal stripes are more likely to occur during printing. We recommend
making correction to match the media you are using. Repeat the process of printing a test pattern and entering
a correction value several times to nd the optimal value.
Depending on the software RIP you are using, you can also make this setting in the software RIP (by, for
example, choosing the media type). When you have made the setting in the software RIP, the software RIP's
setting is used and the machine's setting is ignored.
To Next Page
Loading...
