Reference Manual
00809-0100-4130, Rev AA
May 2009
Rosemount 2130
B-2
APPROVED
MANUFACTURING
LOCATIONS
Slough, UK
Chanhassen, USA
Singapore, Singapore.
ORDINARY LOCATION
CERTIFICATION FOR FM
G5 Project ID: 3024095
The switch has been examined and tested to determine that the design meets
basic electrical, mechanical, and fire protection requirements by FM, a nationally
recognized testing laboratory (NRTL) as accredited by the Federal Occupational
Safety and Health Administration (OSHA).
ORDINARY LOCATION
CERTIFICATION FOR
CSA
G6 Certificate Number 06 CSA 1878089
The switch has been examined and tested to determine that the design meets
basic electrical, mechanical, and fire protection requirements by CSA, a
nationally recognized testing laboratory as accredited by the Standards Council
of Canada (SCC).
CANADIAN
REGISTRATION
NUMBER
Certificate Number CRN 0F04227.2C
Rosemount 2130 CSA approved vibrating fork level switch (2130***G6**,
2130***E6**, and 2130***I6**) when configured with 316L Stainless Steel
(1.4404) wetted parts and either NPT threaded process or ASME B16.5 2-in. to
8-in. flanged process connections meet the requirements of CRN.
EUROPEAN DIRECTIVE
INFORMATION
The EC declaration of conformity for all applicable European directives for this product
can be found on the Rosemount website at www.rosemount.com. A hard copy may be
obtained by contacting your local sales office.
ATEX Directive (94/9/EC)
Complies with the ATEX Directive.
Pressure Equipment Directive (PED) (97/23/EC)
The Rosemount 2130 is outside the scope of PED Directive.
L.V. Directive
EN61010-1 Pollution degree 2, Category II (264V max), Pollution degree 2,
Category III (150V max).
Electro Magnetic Compatibility (EMC) Directive
EN61326 Emissions to Class B. Immunity to industrial location requirements.
CE-mark
Complies with applicable directives (EMC, ATEX, LVD).
To Next Page
Loading...
