The actuator can be configured to be
clockwise or anti-clockwise to close.
Manually operate actuator and valve
to establish correct closing direction.
Conversion Handwheel direction labels
are available.
50
m
50
m
P?
k
PC
k
Ir
k
tP
m
cr
m
c1
k
c2
k
c3
m
tC
k
tO
m
LC
k
LO
m
50
Using the
+
or
-
key, display the
character conforming to correct closing
direction.
[C] in the Setting Field Indicating
Clockwise to Close
[A] in the Setting Field Indicating
Anti-clockwise to Close
Having ensured that the display
corresponds to the established
closing direction
PRESS THE KEY.
The displayed option will flash (stored),
indicating that it has been set.
PRESS THE
k
KEY.
19
Direction to Close
C1
Close Direction
Clockwise
Close Direction
Anticlockwise
Torque
To Next Page
Loading...
