rotork IQT User Manual

50
m
50
m
P?
k
PC
k
Ir
k
tP
m
cr
m
c1
k
c2
k
c3
m
tC
k
tO
m
LC
k
LO
m
50
If the procedure has been followed as
described, the positional display will
indicate that the actuator is in the open
position.
Select Remote control momentarily,
using the red selector to exit setting
procedure and then select required
control: Local, Stop or Remote.
With the correct settings made electric
operation can now be carried out
safely.
26
Return to
Positional Display
Torque

rotork IQT Specifications

General

Quarter-turn	Yes
Housing Material	Aluminum alloy
Torque Range	10 Nm to 3000 Nm
Multi-turn	Yes
Linear	Yes
Ingress Protection	IP68
Communication Protocols	Modbus, Profibus, Foundation Fieldbus
Operating Temperature	+70°C
Local Controls	local pushbuttons
Control Modes	Modulating
Display	LCD
Type	Intelligent Electric Actuator