2015-2017 5.0L Mustang Phase 1-2 RHD ROUSHcharger Kit
SECTION B – MODIFICATIONS
1316-RHD-AA 12152016 43 800.59.ROUSH
6. Install the ground wire with the existing ground
wire near the RH strut tower and retighten the bolt
to 10 Nm. Coil up the extra wire slack.
7. Route and tuck the intercooler pump harness
under the engine harness and down the RH coil
cover towards the fuse box as shown. Secure it in
place with zip ties.
8. Retain the engine harness to the front cover
using the zip tie with fur tree (156-00329) found in
Hardware Kit E (1315-TVSHKE).
To Next Page
Loading...