55
Configuring the Access Point
Configuring WLAN Settings
Figure 26. WEP settings
Using WPA
CAUTION: Do not customize these options unless you are an experienced network
administrator or are under the guidance of an IT/support professional.
Use of WPA PSK allows automatic key generation based on a single passphrase. WPA-
PSK provides very strong security, but may not be supported on older wireless devices.
In some cases, the older devices can be upgraded with adapters to take advantage
of WPA-PSK.
If you configure the AP with WPA-PSK, some network users will not be able to connect
to your WLAN unless their devices are manually set to WPA-PSK and configured with
the same passphrase.
To configure WPA encryption settings
1. Go to Configuration > Wireless. The Configuration :: Wireless :: Common page
appears.
NOTE: If you are using ZoneFlex 7962 AP, go to Configuration > Radio 2.4G or
Configuration > Radio 5G.
To Next Page
Loading...
