65
Configuring the Access Point
Configuring VLAN Settings
Changing an RJ45 Port’s VLAN Tagged State
This task should be performed by an experienced network administrator or are under
the guidance of an IT/support professional.
1. Go to Administrator > VLAN. The Administrator :: VLAN page appears.
2. Click an RJ-45 port icon to change the state from untagged to tagged.
3. Click Update Settings (test) to verify connectivity prior to saving changes. This
prevents you from being locked out in the event you were to change the Manage-
ment interface VLAN ID.
NOTE: This works best in conjunction with “Changing a VLAN ID” on page 64 and
“Changing the Port State of a VLAN” on page 64.
To Next Page
Loading...
