74
Managing the Access Point
Enabling Other Management Access Options
Viewing FlexMaster Management Status
If you configure the AP to be managed by FlexMaster, you can check the TR-069 Status
section on the Administration > Management page.
Figure 37. TR-069 status information
Tabl e 23
lists the TR-069 status information that the AP provides.
Table 23. TR-069 status information
Status Information Description
Currently using Shows the FlexMaster server IP address or
URL with which the AP is currently registered
Last attempted contact Shows the date and time of the AP’s last
attempt to contact FlexMaster. Date and time
are specified in GMT (or UTC), which are
accurate if a Network Time Protocol (NTP)
server is configured.
Last successful contact Shows the date and time of the AP’s last
successful contact with FlexMaster.
To Next Page
Loading...
