DescriptionSetting
Select where you want to redirect the
user after successful authentication.
• Redirect to the above URL: return to
the login URL configured above.
• Redirect to the URL the user intended
to visit: upon successful
authentication, go directly to the URL
that the user originally entered
(typically the browser’s home page).
• Redirect to: specify a URL to which
users are redirected after
authentication. This can be used to
redirect users to a “Login Successful”
page, or a page that offers connection
time information or a Logout button.
After user is authenticated
Enter the IP address of the primary
RADIUS server against which users are
authenticated (required).
Primary RADIUS Server
Enter the IP address of the secondary
RADIUS server, if one is available
(optional).
Secondary RADIUS Server
Enter the shared secret for
communication with the RADIUS server
(required).
RADIUS Server Secret
4. Click Update Settings to save your changes.
You have completed the minimum settings for providing Hotspot service on this AP.
Additional configuration options are available using the Edit Settings buttons on the
page: Customizing Hotspot Optional Settings on page 122.
Customizing Hotspot Optional Settings
Optional Hotspot settings include a number of options for fine-tuning your Hotspot
service, such as maximum session time, grace period, accounting update interval, etc.
1. Go to Configuration > Hotspot.
2. Click the Edit Settings button next to More Options. The More Options page
appears.
122
ZoneFlex Indoor Access Point Release 104.0 User Guide
Configuration
Configuring the AP
To Next Page
Loading...
