DescriptionSetting
This attribute indicates how many
seconds the client has been trying to
send this record for, and can be
subtracted from the time of arrival on the
server to find the approximate time of the
event generating this
Accounting-Request. When enabled, this
attribute appears in accounting request
packets with a starting value of “0”,
incremented each retry packet. When
disabled, this attribute is not included in
any accounting request packet.
Acct Delay Time
Specify the Network Access Server
identifier of this device. The NAS-ID
attribute is sent in RADIUS access and
accounting request messages. It can also
be used as location identification when
NAS-IP-Address cannot be used for this
purpose.
NAS ID
Specify the Hotspot location identifier.
This value is provided in the RADIUS
access and accounting requests. It is
recommended that the value is in the
form of
“isocc=<ISO_Country_Code>,
cc=<E.164_Country_Code>,
ac=<E.164_Area_Code>,
network=<SSID/ZONE>
”.
WISPr Location ID
Specify the hotspot location and
operator's name. This value is provided
in the RADIUS access and accounting
requests. It is recommended that the
value is in the form of
“<HOTSPOT_OPERATOR_NAME>,
<Location>”
.
WISPr Location Name
124
ZoneFlex Indoor Access Point Release 104.0 User Guide
Configuration
Configuring the AP
To Next Page
Loading...
