Figure 43: The Configuration > Radio 5G > Wireless 9 tab
2. In Wireless Availability, click Enabled.
3. In Broadcast SSID, click Enabled.
4. Clear the SSID box, and then type a unique and descriptive name that you want to
call this wireless network.
For example, you can type Ruckus Wireless AP. This SSID is the name that
helps users identify this wireless network in their wireless network connection
application.
NOTE You may also configure other wireless settings on this and other Wireless #
tabs (in addition to the settings described above), although it is not necessary for
completing the AP installation.
5. Click Update Settings.
You have completed configuring the basic wireless settings of the AP.
(Optional) Setting the FlexMaster Server Address
When you have a FlexMaster server installed on the network and you intend to use
FlexMaster to manage the AP, you can set the FlexMaster server address at this point.
Before starting this procedure, make sure you obtain the correct FlexMaster server URL.
NOTE In addition to setting the FlexMaster server URL manually on the AP, you can
also use DHCP Option 43 or DNS to point the AP to the FlexMaster server. For more
information, refer to the FlexMaster User Guide.
1. On the menu, click Administration > Management.
2. Scroll down the page to the TR069 / SNMP Management Choice section.
ZoneFlex Indoor Access Point Release 104.0 User Guide
81
Installation
Step 1: Preconfiguring the AP
To Next Page
Loading...
