English
8
44
OPTIO
N NO.
MENU ITEM
Description
6.1.2.1Coin mechanismCREDIT PROGRAMMING (OVERPAY)
It is possible to decide whether to:
- Collect any credit in excess of the selection amount after a certain time expressed in seconds (parameter "deleted").
- Leave any credit in excess of the selection amount available for a subsequent selection (parameter "retained").
OVERPAY TIMEOUT
Makes it possible to set the time when the credit will be released if a selection hasn't been made.
Max credit
This function makes it possible to define the maximum credit for coins introduced which is accepted.
Max change
It is possible to set a limit for the total amount of change that the coin mechanism will pay when the return change button is pressed or after a
single dispensed beverage.
Any credit exceeding the amount that has been programmed with this function, will be collected.
6.1.2.2MDB coin settingsManagement of coin settings.
6.1.2.2.
1
AcceptedIt is possible to define which of the coins recognised by the validator shall be accepted when the changegiver tubes are full.
For the coin/value correspondence, the configuration of the coin mechanism needs to be checked.
6.1.2.2.
2
Exact change acceptedIt is possible to define which coins recognised by the validator must be accepted when the machine is in "exact amount" mode.
For the coin/value correspondence, the configuration of the coin mechanism needs to be checked.
6.1.2.2.
3
ReturnedIt is possible to define which coins among those available in the tubes shall be used for giving change.
This parameter is only active with coin mechanisms that do not automatically choose which tube to use (Auto changer payout).
For the coin/value correspondence, the configuration of the coin mechanism needs to be checked.
6.1.2.2.
4
Vend token valueValue of the sales token.
This is a token that is recognised and to which a sales price is associated.
To request a drink, the value of the token must be greater than or equal to the price of the drink.
Does not give change.
6.1.2.2.
5
Exact change settingsEach algorithm checks a set of conditions (the amount of coins in the tubes or the empty or full status) in the tubes which is then used by the coin
mechanism to give change.
The "No change given" condition occurs when the tubes combined with the chosen algorithm have reached the minimum level of coins.
For the sake of simplicity, the combination is described in reference to tubes A, B and C, where tube A receives the lower value coins and tube C
the higher value coins.
0 = A or (B and C)
1 = A and B and C
2 = only A and B
3 = A and (B or C)
4 = only A
5 = only A or B (default)
6 = A or B or C
7 = only A or B
8 = only A or C
9 = only B and C
10 = only B
11 = only B or C
12 = only C
For example: algorithm "6" will display the "No change given" message when all the tubes (A, B and C) are at the minimum level.
Algorithm "4" will only display the "No change given" message when tube A (coin with the least value) has reached its minimum coin level.
6.1.2.3Device without changeHIDE KEY CREDIT
To protect the users' privacy, this function makes it possible to display "-----" instead of the credit remaining on the cashless system.
UNDEFINED CREDIT ACCEPTANCE
This function allows you to accept or reject the cashless payment systems (key or card) if the cashless system credit is not defined.
CASH-SALE COMMANDS
Enables/disables the cash-sale function.
Makes it possible to show that the transactions made in cash took place through a cashless system.
The available values are:
- 0: the cash transactions are recorded as such (standard operation).
- 1: the cash transactions are recorded as transactions performed by the first cashless system.
- 2: the cash transactions are recorded as transactions performed by the second cashless system.
REVALUE
Enables / disables the banknotes reader exclusively for recharging the credit on the cashless system (key or card).
SECOND CASHLESS
Enable / disable the operation of a second cashless system.
6.1.2.4Check keys without
cash
MDB cashless device, keys, credit, user group, price list.
6.1.2.5Banknote acceptorMDB bill acceptor settings.
6.1.2.6MDB banknotes
settings
Management of bill settings.
6.1.2.6.
1
AcceptedIt is possible to define which banknotes among those recognised by the reader must be accepted.
In relation to the banknote/value correspondence, the configuration of the reader needs to be checked.
6.1.2.6.
2
Exact change acceptedIt is possible to define which banknotes among those recognised by the reader shall be accepted when the machine is in "exact amount" mode.
For the banknote/value correspondence, the configuration of the reader needs to be checked.
6.1.3Virtual CreditsAs alternative to the MDB payment method, it allows beverages to be dispensed with virtual credits.
6.1.4Beverage selection
numbers
It is possible to assign an ID to every beverage.
6.2Price
6.2.1Currency symbolWhen the credit is displayed, this function allows the currency symbol to be set from those that have been predefined.
6.2.2Overall beverage priceThe appliance (depending on the payment method) can manage up to 4 different prices for each selection.
The prices can be active according to the time frame that has been set (standard or promotional).
The prices are grouped into 4 lists.
For each of the 4 lists, the price can be set in a comprehensive manner (same price for all selections).
To Next Page
Loading...
