Sam4s SER-7040 - Page 108

102
x
P-Mode Programming SER-7000 Program Manual
GENERAL FUNCTION OPTIONS
MAXIMUM DIGIT (1-5) 1
13.PLU PRESET/HALO OVERRIDE N
14.SILENT KEY DEPRESSION N
15.Y=CODE ENTRY/N=A/N OVERLAY N
16.OPEN ENTRY FOR SCALE PLUS N
17.DEACTIVATE VOID MODE N
! ESC Y/N ENTER PAGE UP/DN
npom
GENERAL FUNCTION OPTIONS
18.DISABLE TIME/DATE PROGRAM N
19.ALLOW PLU COPY BY RANGE N
20 ALLOW POST TENDERING N
21 EMP.: Y=POP UP/N=STAY DOWN N
22 EMP. SIGN ON: EMPLOYEE#

23.QTY LIMIT FOR X/TIME 000.000
! ESC Y/N ENTER PAGE UP/DN
npom
GENERAL FUNCTION OPTIONS
24.EMP. # LINKED "EMP.1" KEY 01
25.EMP. # LINKED "EMP.2" KEY 00
26.EMP. # LINKED "EMP.3" KEY 00
27.EMP. # LINKED "EMP.4" KEY 00
28.EMP. # LINKED "EMP.5" KEY 00
29.EMP. # LINKED "EMP.6" KEY 00
! ESC Y/N ENTER PAGE UP/DN
npom
GENERAL FUNCTION OPTIONS
30.EMP. # LINKED "EMP.6" KEY 00
31.EMP. # LINKED "EMP.6" KEY 00
32.EMP. # LINKED "EMP.6" KEY 00
33.EMP. # LINKED "EMP.6" KEY 00
34.AUTO CLEAR ERROR CONDITION Y
! ESC Y/N ENTER PAGE UP/DN
npom
GENERAL FUNCTION OPTIONS
35.GUEST CHECK BALANCE HALO
(0=NO LIMIT)0000000.00
36.SET DEFAULT SEAT# TO 1 N
37.CONT MACRO IF MACRO IS LOOP N
38.ENTER TIME FOR TRANS. VOID Y
39.START AT PRICE1 IN PLU PGM Y
! ESC Y/N ENTER PAGE UP/DN
npom