Sam4s SER-7040 - Memory Clear

SER-7000 Program Manual S-Mode Programming
x
25
Display Test
PRESS ANY KEY TO RETURN
1. Select DISPLAY
from the H/W TEST
MENU to begin the
display test.
2. At the completion of
the display exercise,
the message "Rear
LCD Test" will
display.
3. Press any key to
return to the H/W
TEST MENU.
Keyboard Test
KEY TEST
PRESS KEY
TURN
MODE KEY
TO FINISH
1. Select KEYBOARD
from the H/W TEST
MENU to display the
KEY TEST screen.
2. Each key is depicted
at a square on the
keyboard. Press any
key; the key will be
indicated on the
display.
3. Turn the MODE key
to exit and return to
the H/W TEST
MENU.