Sam4s SER-7040 - Check

80
x
P-Mode Programming SER-7000 Program Manual
Check
FUNC. KEY #021 PROGRAMMING
DEFAULT DESC : CHECK
DESCRIPTOR : CHECK
HALO (0=NO LIMIT) 00000.00
1 2 3 4 5 6
EXEMPT TAX : N N N N N N
OPEN DRAWER Y
ESC Y/N ENT PAGE UP/DN
npom
FUNC. KEY #021 PROGRAMMING
COMPULSORY VALIDATION N
COMPULSORY CHECK ENDORSEMENT N
AMOUNT TENDER COMPULSORY N
DISABLE UNDER TENDERING N
UNDER TENDERING IN X ONLY N
NON-ADD# ENTRY COMPULSORY N
! ESC Y/N ENT PAGE UP/DN
npom
FUNC. KEY #021 PROGRAMMING
HALO : Y=CHANGE/N=TENDER N
COIN CHANGER PORT# (0-4) 0

ESC Y/N ENT PAGE UP/DN
npom
Check Key Program Note
FIELD Notes
COIN CHANGER PORT#
(0-4)
Enter the number of the serial port to which the coin
changer is attached.