Sam4s SER-7040 - Error Messages

SER-7000 Program Manual P-Mode Programming
x
141
Error Messages
Using this program, you can change the standard error messages from the default settings to
messages that meet your language or application needs.
Note: Use (22) P-Mode Program Scan Printing to print a list of error messages.
ERROR MESSAGE PROGRAMMING ALPHA
(NOT USE)
(NOT USE)
AMOUNT REQUIRED
BAD VALUE
BUFFER FULL
ESC Y/N ENTER PAGE UP/DN
npom
1. Choose ERROR
MESSAGE from the
MESSAGES MENU
to display the
ERROR MESSAGE
PROGRAMMING
screen.
2. Select a message to
edit. Press the
n
or
p
keys and the PAGE
UP or PAGE DN
keys as necessary.
3. With a message
selected, type a new
message up to 30
characters in length.
4. Press ENTER to
finalize each message
entry.
5. Press ESC to exit the
screen and return to
the MESSAGES
MENU screen.