Sam4s SER-7040 - Authority Level Alpha Descriptors

SER-7000 Program Manual P-Mode Programming
x
163
Authority Level Alpha Descriptors
1. Select AUTHORITY
LEVELS from the P-
MODE
PROGRAMMING
MENU to display the
PROGRAMMING
Screen.
AUTHORITY LEVEL PROGRAMMING
ALPHA DESCRIPTORS
AUTHORITY LEVEL : 123456789
1.CLK-IN/OUT ENTRY ONLYNNNNNNNNN
2.CLOCK-IN BEFORE SALESNNNNNNNNN
3.CLOCK-OUT W OPEN CHKSNNNNNNNNN
4.GC ENTRIES ONLY NNNNNNNNN
ESC Y/N ENTER PAGE UP/DN
npom
AUTHORITY LEVEL DESCRIPTOR ALPHA
LEVEL 1 DESC
LEVEL 2 DESC
LEVEL 3 DESC
LEVEL 4 DESC
LEVEL 5 DESC
LEVEL 6 DESC
ESC Y/N ENTER PAGE UP/DN
npom
2. Press ENTER to
display the
AUTHORITY
LEVEL ALPHA
DESCRIPTORS
screen.
3. Press the
n
or
p
keys
to select a descriptor
field to edit.
4. Enter a descriptor.
Press ENTER to
finalize the entry and
move to the next
authority level
descriptor field.
5. Continue to program
descriptors or press
ESC to exit and
return to the
AUTHORITY
LEVEL
PROGRAMMING
screen.