Sam4s SER-7040 - Validation;Subtotal Print Options

SER-7000 Program Manual P-Mode Programming
x
119
Validation/Subtotal Print Options
VALIDATION/SUBTOTAL OPTIONS
1. VALID AMT: Y=TOTAL/N=TENDER N
2. CHK VALID AMT:Y=TTL/N=TEND N
3. ACTIVATE VALIDATION SENSOR N
4. ALLOW MULTIPLE VALIDATIONS Y
5. PRINT VALIDATION MESSAGE Y
6. PRT SBTL WHEN SBTL PRESSED N
ESC Y/N ENTER PAGE UP/DN
npom
VALIDATION/SUBTOTAL OPTIONS
7. VALIDATION PORT# (0-7) 00
8. DISP RUNNING SUBTL ON POLE N

ESC Y/N ENTER PAGE UP/DN
npom
1. Select
VALIDATION/
SUBTOTAL PRINT
OPTIONS from the
SYSTEM OPTION
PROGRAMMING
screen. The
validation and
subtotal print options
display with the first
option field selected.
(There is only one
page of validation
and subtotal print
options.)
2. Select fields and
change information in
the same manner as
described for general
options.