Sam4s SER-7040 - System Descriptors

142
x
P-Mode Programming SER-7000 Program Manual
System Descriptors
Using this program, you can change the standard system descriptors from the default settings
to messages that meet your language or application needs.
The length of each descriptor varies. For example day of week fields are 3 characters, while
other printed messages are 5 characters or more.
Note: Use (22) P-Mode Program Scan Printing to print a list of system descriptors.
SYSTEM DESCRIPTOR PGM ALPHA
#001 SUN
#002 MON
#003 TUE
#004 WED
#005 THU
ESC Y/N ENTER PAGE UP/DN
npom
1. Choose SYSTEM
DESCRIPTORS to
display the SYSTEM
DESCRIPTOR
PROGRAMMING
screen.
2. Press the
n p m o
keys to move the
cursor to a new
position. Type a
new message over the
default descriptor.
3. Press ESC to exit the
screen and return to
the MESSAGES
MENU screen.