Sam4s SER-7040 - Memory Allocation

28
x
S-Mode Programming SER-7000 Program Manual
Printer Test
** SER-7000 PRINTER TEST **
1. Select PRINTER
from the H/W TEST
MENU to begin the
printer test.
2. The printers will print
test patterns
continuously until the
CLEAR key is
pressed.
3. Press ESC to return
to the H/W TEST
MENU.
RAM Checksum
BASE RAM : 00020147
EXT. RAM : 00000000
PRESS ANY KEY TO RETURN
1. Select DISPLAY
from the H/W TEST
MENU to begin the
display test.
2. The messages:
"Calculating Base
RAM checksum" and
Calculating Ext.
RAM checksum" will
display momentarily
before the RAM
checksums display.
3. Press any key to
return to the H/W
TEST MENU.