Sam4s SER-7040 - PLU Programming

SER-7000 Program Manual P-Mode Programming
x
61
PLU Programming
The maximum number of PLUs available is determined in memory allocation. (See
"Memory Allocation" in "S-Mode Programming".) Each PLU can be assigned a code
number up to 14 digits in length.
PLU PROGRAMMING
1. ADD & CHANGE
2 DELETE
ESC ENTER PAGE UP/DN
np
1. Select PLU from the
P-MODE
PROGRAMMING
MENU to display the
PLU
PROGRAMMING
screen.
2. Press a numeric digit
(1-2) or press the
n
or
p
keys to move the
cursor to ADD &
CHANGE or
DELETE, and then
press ENTER.