Sam4s SER-7040 - E.j. (Electronic Journal) & Detail Printing Options

132
x
P-Mode Programming SER-7000 Program Manual
E.J. (Electronic Journal) & Detail Printing Options
E.J. & DETAIL PRINTING OPTI
1. ACTIVATE ELECTRONIC JOURNAL N
2. DISP E.J. BUFF FULL WARNING N
3. E.J. OVERRIDE ON BUFF FULL N
4. SEND TO ELECTRONIC JOURNAL:
CASH TRANSACTIONS N
CHECK TRANSACTIONS N
ESC Y/N ENTER PAGE UP/DN
npom
E.J. & DETAIL PRINTING OPTI
4. SEND TO ELECTRONIC JOURNAL:
MISC TENDER TRANSACTIONS N
TRANSACTIONS WITH % N
RECD ACCT & PAID OUT N
RETURN TRANSACTIONS N
TRANS. WITH ERR.CORR&VOID N
! ESC Y/N ENTER PAGE UP/DN
npom
E.J. & DETAIL PRINTING OPTI
4. SEND TO ELECTRONIC JOURNAL:
NO SALES N
CANCEL TRANSACTIONS N
TRANSACT WITH NEG. ITEMS N
REPORTS N
PROGRAM SCANS N
! ESC Y/N ENTER PAGE UP/DN
npom
E.J. & DETAIL PRINTING OPTI
4. SEND TO ELECTRONIC JOURNAL:
CHECK TRACKING N
5. SEND TO DETAIL:
ONLY TRANS WITH NEG ITEMS N
REPORTS N
PROGRAM SCANS N
! ESC Y/N ENTER PAGE UP/DN
npom
1. Select E.J.
PRINTING
OPTIONS from the
SYSTEM OPTION
PROGRAMMING
screen. The first
option field is
selected. (There are
two pages of E.J. &
Detail Printing
options.)
2. Select fields and
change information in
the same manner as
described for general
options.
E.J. & DETAIL PRINTING OPTI
6. CONDENSED PRINT ON DETAIL N
7. PRINT NEGA. LINES IN BOLD N
8. DISABLE REG. DETAIL PRINTER N

ESC Y/N ENTER PAGE UP/DN
npom